Dedicated Software for application on Elevators.

Drive asynchronous motor with or without encoder as well as synchronous permanent magnet motors.

Drive of synchronous permanent magnet motor with simple encoder. Other types of encoders can be used with the installation of optional cards: Heidenhain EnDat2.1 (OPC- LM1- PS1), SinCos (OPC- LM1- PR).

For easy control of a synchronous permanent magnet motor, the FRENIC Lift comprises an automatic function for pole tuning which is executed immediately after powering up the inverter.

Static Auto Tuning and Pole Tuning. FRENIC Lift is capable of executing Static Auto- tuning for asynchronous motors and Static Pole Tuning for synchronous permanent magnet motors. During the two processes, the mechanical brake continues to be applied, thus avoiding time loss while removing load from the motor.

Open Loop function.

Impeccable elevator cabin movement behavior by eradicating the “roll back” phenomenon.

“Short floor” function.

“Direct to floor” function.

Brake Control.

Monitoring of brakes operation according to EN81-1+A3 (UCM) Standard.

Maneuvers control.

Anticipated door opening function.

Easy rescue function. It can be supplied by using batteries and / or UPS. Signal for indicating the proposed direction.

10 different linear / ramps acceleration – deceleration.

14 different S ramps.

Multi-functional LCD (TP- G1- ELS) keyboard: Possibility to store 3 full parameter sets. Menu 0 can be set by the user. 10 European languages can be selected: English, German, French, Spanish, Italian, Russian, Greek, Czech, Polish and Turkish.

Automatic cooling fan control: silent operation and energy saving.

Managing of up-down commands.

Alternation between automatic function and maintenance function.

Selection of maintenance speed.

Selection of speeds: high – medium – approaching floor level – rescue.

Cancellation of undervoltage malfunction during rescue operation.

Protection of phase loss at input or / and output.

Signal indicating prompt warning from overheating.

EN954-1 Cat. 3

Stop category 0

ISO EN13849-1 PLd

IEC EN 61508 SIL2

EMC Directive 2004/108/EC: EN61800-3:2004

EN12015:2004 (with option)

EN12016:2004