Compax C3T10

Intelligent Servo Drive with Step/Direction and +/-10 V Interface

  • Rated current 1.5 up to 155 A
  • Input power230/400/480 VAC
  • Auxiliary supply voltage 24 VDC +/-10%
  • Command interface
  • Step-/direction-input
  • ±10 V analog-input
  • Encoder-input
  • 8 digital inputs / 4 digital outputs
  • Serial line: RS232 / 485 (standard)
  • Installation in 300 mm control cabinets
  • All connections on front panel
  • UL-certification
  • ServoSignalAnalyzer: Signal analysis for the mechatronic system optimization – PC based

Compax C3T11

Positioning via:

  • I/Os
  • RS232/RS485
  • Profibus
  • CANopen
  • DeviceNet
  • EtherCAT
  • Ethernet Powerlink

Technical data:

  • Rated current 1.5 up to 155 A
  • Input power 230/400/480 VAC
  • Auxiliary supply voltage 24 VDC +/-10%
  • 1 encoder output / 1 encoder input
  • 8 digital inputs / 4 digital outputs
  • 2 analogue inputs (14 Bit)
  • Serial line: RS232/485 (standard)
  • Fieldbus options: PROFIBUS – 12MBaud, CANopen, DeviceNet, Ethernet Powerlink
  • Installation in 300 mm control cabinets
  • All connections on front panel

Motion functions:

Absolute/relative/reg related / superimposed / interpolated positioning, electronic gearbox, direct or via set table

ServoSignalAnalyzer:

Signal analysis for the mechatronic system optimization – PC based.

Compax C3 T40

Electronic Cam with IEC61131-3 and PLCopen Modules

Positioning via:esfsegs

  • Rated current 1.5 up to 155 A
  • Input power 230/400/480 VAC
  • Auxiliary supply voltage 24 VDC +/-10%
  • 1 encoder output / 1 encoder input
  • 8 digital inputs / 4 digital outputs
  • 2 analogue inputs (14 Bit)
  • Serial line: RS232/485 (standard)
  • Fieldbus options: PROFIBUS – 12MBaud, CANopen, DeviceNet, EtherCAT, Ethernet Powerlink
  • Installation in 300 mm control cabinets
  • All connections on front panel
  • UL-certification

PLCopen function modules:

MC_Home, MC_Stop, MC_MoveVelocity, MC_MoveAbsolute, MC_MoveRelative, MC_MoveAdditive, MC_GearIn, MC_CamIn, MC_Phasing, MC_Superimposed

Compax3 function modules:

C3_Jog, C3_Current, C3_TouchProbe, C3_CamIn, C3_CamTableSelect, C3_MasterConfig, C3_SetMaster, C3_CamOut Timer, Trigger, FlipFlops, Numerator 650/200 16/32Bit variables; Recipe table (288 variables), 6 Retain – variables.

Real time coupling:

Master-Slave, Slave-Master, Slave-Slave practically all process data.

ServoSignalAnalyzer:

Signal analysis for the mechatronic system optimization – PC based.

Cam switching mechanism